 |
Polarizing Networks |
Switch to your choice!
Custom designed to your requirements, these networks are available in:
WR 28, 42, 51, 62, 75, 90, 112, 137, 284
Vertical or horizontal linear polarization and right or left hand circular polarization are options along with circular or square outputs. For further information, call 203-461-9000 ext. 308 Visit us at www.dage.com today.
62PK429
Typical Electrical Characteristics
| Frequency: VSWR: Axial Ratio: Insertion Loss: Peak Power: Average Power: Switch Performance: |
16.0 to 17.0 GHZ 1.2:1 Max 0.75dB Max 0.3dB 50KW 50KW 28V DC, 2 Amps |
| ITEM | SIZE | BENDS | COMMENTS |
| A,B,C | WR62 | A/R | The lengths and bends of waveguide sections A, B, and C shall minimize the physical envelope of the assembly, minimize insertion loss, and maintain phase match between the Input Port and the Output Port in the dual mode (circular) configuration. |
| SW | WR62 | N/A | Microwave Development Lab P/N 62SR46 or equivalent |
| OMT | WR62 | N/A | Microwave Development Lab P/N 62TR16 or equivalent |
| SC | WR62 | N/A | Microwave Development Lab P/N 62HS112 or equivalent |
|
Waveguide to coax Adapters |
SMA Female Adapters
| Frequency Range (GHZ) | Model Number | VSWR MAX | "A" MAX | "B" MAX | "C" ±.02 | Connector Female |
| 26.5 - 40.0 | 28AC206 | <1.25 | .52 | .52 | .35 | 2.9mm |
| 22.0 - 33.0 | 34AC206 | <1.25 | .56 | .54 | .40 | 2.9mm |
| 18.0 - 26.5 | 42AC206 | <1.25 | .62 | .42 | .40 | SMA |
| 18.0 - 26.5 | 42AC216 | <1.15 | .62 | .42 | .40 | 2.9mm |
| 18.0 - 26.5 | 42AC226 | <1.15 | .62 | .42 | .40 | 3.5mm |
| 12.4 - 18.0 | 62AC206 | <1.25 | .79 | .62 | .50 | SMA |
| 10.0 - 15.0 | 75AC206 | <1.25 | .90 | .68 | .55 | SMA |
| 10.0 - 15.0 | 75AC216 | <1.15 | .90 | .68 | .55 | SMA |
| 8.2 - 12.4 | 90AC206 | <1.25 | 1.02 | .69 | .62 | SMA |
|
90° E Bends |
| W/G Size Freq GHz |
Model Number | A | B | C REF | D REF |
| WR-22 33.00 - 50.00 |
22BE11 | .125 | .125 | .40 | .30 |
| WR-28 26.50 - 40.00 |
28BE11 | .140 | .140 | .44 | .30 |
| WR-34 22.00 - 33.00 |
34BE11 | .170 | .170 | .50 | .34 |
| WR-42 18.00 - 26.50 |
42BE11 | .140 | .140 | .60 | .35 |
| WR-51 15.00 - 22.00 |
51BE11 | .187 | .187 | .67 | .42 |
| .34WR-62 .3.60512.40 - 18.00 |
62BE11 | .250 | .250 | .81 | .50 |
| WR-62 12.40 - 18.00 |
62BE111 | .280 | .280 | .81 | .50 |
| WR-75 10.00 - 15.00 |
75BE11 | .325 | .325 | .95 | .58 |
| WR-75 10.00 - 15.00 |
75BE111 | .312 | .312 | .95 | .56 |
| WR-90 8.20 - 12.40 |
90BE11 | .325 | .325 | 1.13 | .63 |
| WR-102 7.00 - 11.00 |
102BE11 | .380 | .380 | 1.27 | .76 |
| WR-112 7.05 - 10.00 |
112BE11 | .344 | .344 | 1.39 | .76 |
| WR-112 7.05 - 10.00 |
112BE111 | .382 | .382 | 1.39 | .76 |
| WR-137 5.85 - 8.20 |
137BE11 | .438 | .438 | 1.64 | .88 |
| WR-137 5.85 - 8.20 |
137BE111 | .437 | .437 | 1.62 | .87 |
| WR-159 5.85 - 8.20 |
159BE11 | .550 | .550 | 1.90 | 1.11 |
| WR-187 5.85 - 8.20 |
187BE11 | .593 | .593 | 2.18 | 1.18 |
| WR-187 5.85 - 8.20 |
187BE111 | .562 | .562 | 2.19 | 1.18 |
| WR-229 5.85 - 8.20 |
229BE11 | .700 | .700 | 2.61 | 1.47 |
| WR-284 5.85 - 8.20 |
284BE11 | .781 | .781 | 3.25 | 1.68 |
NOTES:
- Tolerances on quadrants of all 90° cast bends are:
- ± .003 WR 22, WR 28, WR 34, WR 42, WR 51
- ± .005 WR 62, WR 75, WR 102, WR 12, WR 137
- ± .008 WR159, WR 187
- ± .010 WR 229, WR 284
All other dimensions for reference use only.
- VSWR: 1.05:1 maximum.
- All corral openings are made to accept standard WR size waveguide per MIL-W-85.
- Finish: Inside and outside, C-12/125 microinches per NAS 823.
- Maerial Code:
- A - Aluminm Alloy D712 in accordance with ASTM B-26.
- B - Copper Alloy C82500 in accordance with Federal spec QQC-390.
- S - Silicon Bronze Alloy S87200 in accordance with Federal spec QQC-390.
|
|
90° H Bends |
| W/G Size Freq GHz |
Model Number | A | B | C REF | D REF |
| WR-22 33.00 - 50.00 |
22BH11 | .187 | .187 | .30 | .40 |
| WR-28 26.50 - 40.00 |
28BH11 | .210 | .210 | .30 | .44 |
| WR-28 26.50 - 40.00 |
28BH111 | .343 | .343 | .30 | .44 |
| WR-34 22.00 - 33.00 |
34BH11 | .255 | .255 | .34 | .50 |
| WR-42 18.00 - 26.50 |
42BH11 | .300 | .300 | .35 | .60 |
| WR-51 15.00 - 22.00 |
51BH11 | .312 | .312 | .42 | .67 |
| WR-62 12.40 - 18.00 |
62BH11 | .368 | .368 | .52 | .78 |
| WR-75 10.00 - 15.00 |
75BE11 | .484 | .484 | .57 | .95 |
| WR-75 10.00 - 15.00 |
75BE111 | .500 | .500 | .56 | .94 |
| WR-90 8.20 - 12.40 |
90BH11 | .575 | .575 | .63 | 1.13 |
| WR-102 7.00 - 11.00 |
102BH11 | .640 | .640 | .76 | 1.27 |
| WR-112 7.05 - 10.00 |
112BH11 | .656 | .656 | .76 | 1.39 |
| WR-112 7.05 - 10.00 |
112BH111 | .695 | .695 | .76 | 1.39 |
| WR-137 5.85 - 8.20 |
137BH11 | .828 | .828 | .89 | 1.63 |
| WR-137 5.85 - 8.20 |
137BH111 | .812 | .812 | .87 | 1.62 |
| WR-159 5.85 - 8.20 |
159BH11 | 1.000 | 1.000 | 1.11 | 1.90 |
| WR-187 5.85 - 8.20 |
187BH11 | 1.062 | 1.062 | 1.18 | 2.18 |
| WR-229 5.85 - 8.20 |
229BH11 | 1.234 | 1.234 | 1.46 | 2.60 |
| WR-284 5.85 - 8.20 |
284BH11 | 1.531 | 1.531 | 1.67 | 3.18 |
Microwave Development Laboratories, Inc., has utilized its full design and development capabilities to improve and supplement the performance of cast waveguide bends. As a result of extensive research, MDL now offers the most complete line of cast bends in the industry. These units are cast within MDL's own foundry facilities. Quality control standards are such as to insure the highest caliber casting. VSWR characteristics of these bends is typically 1.03 with a maximum of 1.05.
Units are readily supplied from stock or on short term delivery. In addition to these items, unusual configurations can be fabricated or castings developed to meet specific requirements if customers demands cannot be met with these basic designs. Call 203-461-9000 ext. 308 Visit us at www.dage.com