2 kW Peak, 80 W Average SPDT Switches
Features
|
|
DESCRIPTION
The broadband SPDT switches are designed for reliable operation at power levels to 2 kW Peak., 80 W Average from 0.5 to 18 GHz. These are robust PIN diode switches with proven field reliability. Proprietary PIN diode architecture minimizes junction temperatures to assure long life under high power conditions. Small size and weight, fast switching speed and low power consumption make this an ideal candidate for retrofit of ferrite or electromechanical designs. Typical applications include cross-sectional measurements, polarity selection, transmit/receive, filter banks, complex high power switch matries, blanking, etc. Consult DAGE for SPNT configurations. When ordering switches, please indicate if there is a specific frequency band of operation. In some instances, Enon can optimize the performance for your specific needs. Call 203-461-9000 ext. 308 Visit us at www.dage.com
| Product Number | Freq. Band GHz | Peak Power Watts | Average Power Watts | Insertion Loss, dB(typical) | Isolation dB (min.) | Switching, Speed, us. (max.) |
| ES0005 | 0.5-1 | 2000 | 80 | 0.5 | 55 | 2.0 |
| ES0006 | 1.0-2.0 | 2000 | 80 | 0.6 | 55 | 2.0 |
| ES0007 | 2.0-4.0 | 2000 | 80 | 0.75 | 50 | 2.0 |
| ES0008 | 4.0-8.0 | 2000 | 80 | 1.2 | 45 | 2.0 |
| ES0009 | 8.0-12.0 | 2000 | 80 | 1.2 | 45 | 2.0 |
| ES0010 | 12.0-18.0 | 2000 | 80 | 2.0 | 40 | 2.0 |
Common Switch Specifications
- VSWR:1.8:1 maximum, except for ES0010. ES0010 VSWR is 2.2:1 maximum
- TTL Control Rate: 100 kHz maximum
- Logic:TTL, unbalanced, E1 logic input.
- Control:E1 TTL Lo J1 to J2, E1 TTL H1 J1 to J3
- Configuration: SPDT, Reflecting
- Switching: "Cold", RF must be gated off during switching.
- Switching Speed: Measured from the 10% to 90% and the 90 to 10% of the detected RF signal.
- Supply: Positive: +5 V +/- 5% @ 300 mA maximum.
- Negative: - 70 V +/- 2% @ 100 mA maximum, except for ES0005 which is -250v +/- 2% @ 40 mA maximum.
- Connectors: RF / Control: SMA - F, Bias: ,Solder Pins.
- RF Pulse Width: 10 us. maximum.
- Mechanical: Outline: 2.30 x 1.55 x 0.50 (inches).
- Mounting: 0.125 diameter thru, 4 places (inches).
- Operating Temperature: -55 to +85 degrees C.
- Storage Temperature: -55 to +125 degrees C.
- Seal: Unit is hermetically sealed.
- Altitude: 50000 feet maximum.
Specifications subject to change.