10 W CW, Hot Switching, 2 MHz Switching Rate SPDT Switches

Features

  • State of the Art PIN Diode Architecture
  • Fast Switching Speeds
  • Low Loss, High Isolation, Broad Band
  • Small Size & Weight

 

Descriptions

The ENON 10 W CW Hot Switching series of broadband SPDT switches are designed for reliable operation from 2 to 18 GHz. These are robust PIN diode switches with proven field reliability. Proprietary PIN diode architecture minimizes junction temperatures to assure long life under high power conditions. Typical applications include cross-section measurements, polarity selection, transmit/receive, filter banks, complex high power switch matrices, blanking, etc. Consult factory for SPNT configurations. When ordering switches, please indicate if there is a specific frequency band of operation. In some instances, Enon can optimize the performance for your specific needs.

Contact DAGE Corporation to discuss your requirements - 203-461-9000 ext. 308  Visit us at www.dage.com

Product Number

Freq. Band GHz

Insertion Loss, dB (typical)

Isolation dB (minimum)

VSWR

ES0129

2.0 - 4.0

0.7

50

1.8:1

ES0130

4.0 - 8.0

<1

50

1.8:1

ES0131

8 - 12

1.5

50

2.0:1

ES0132

12 - 18

1.8

45

2.0:1

ES0133

8-18

<2

45

2.0:1

Common Switch Specifications

  • TTL Control Rate: 2 MHz maximum.
  • Logic: TTL, unbalanced. E1 Logic input.
  • Control:E1 TTL LO J1 to J2, E1 TTL HI J1 to J3.
  • Configuration: SPDT, Reflecting.
  • Switching: "Hot" switching.
  • Switching Speed: 40 ns maximum. Measured from the 50% control to the 10 / 90% of the detected RF signal.
  • Supply: Positive: +5 V +/- 5% @ 125 mA maximum.
  • Negative: - 15 V +/- 2% @ 50 mA maximum.
  • Connectors: RF / Control: SMA - F,
  • Outline: 2.30 x 1.55 x 0.50 (inches).
  • Mounting: 0.125 diameter thru, 4 places (inches).
  • Temperature: Operating: -55 to +85 degrees C.
  • Storage: -55 to +125 degrees C.
  • Seal: Units are hermetically sealed
  • Altitude: 50000 feet. maximum.

Specifications subject to change.